Position : Home > Product > Endress+Hauser > Pressure Transmitters

Cerabar S PMP71
  • Cerabar S PMP71

Endress + Hauser Cerabar S PMP71

Details

 Endress + Hauser Cerabar S PMP71 

Product description

Pressure transmitter with metal sensor

Overload-resistant and function-monitored; Communication via HART, PROFIBUS PA or FOUNDATION Fieldbus

 

Your benefits

 

·    Very good reproducibility and long-term stability

·    High reference accuracy: up to ±0.075%, as PLATINUM version: ±0.05%

·    Turn down 100:1, higher on request

·    Used for process pressure monitoring up to SIL3, certified according to IEC 61508 by TÜV SÜD

·    HistoROM®/M-DAT memory module

·    Function-monitored from the measuring cell to the electronics

·    Continuous modularity for differential pressure, hydrostatic and pressure (Deltabar S, Deltapilot S, Cerabar S), e.g.
- replaceable display
- universal electronic

·    Quick commissioning thanks to quick setup menu

·    Menu-guided operation

·    Extensive diagnostic functions

Cerabar S PMP71 with MID Parts Certificate:

 

Pressure transmitter with metal sensors

Overload-resistant and function-monitored; Communication via HART; Subcomponent suitable for custody transfer measurement with NMi approval

Your benefits:

 

·    Very good reproducibility and long-term stability

·    High reference accuracy: up to ±0.075%, as PLATINUM version: ±0.05%

·    Used for process pressure monitoring up to SIL3, certified to IEC 61508 by TÜV SÜD

·    HistoROM®/M-DAT memory module

·    Function-monitored from the measuring cell to the electronics

·    Quick commissioning with Quick Setup menu

Menu-guided operation

Field of application

The Cerabar S pressure transmitter is used for the following measuring tasks:

 

·    Absolute pressure and gauge pressure in gases, steams or liquids in all areas of process engineering and process measurement technology

·    Level, volume or mass measurement in liquids

·    High pressure up to 700 bar

·    International usage thanks to a wide range of approvals

Cerabar S PMP71 with MID Parts Certificate:

Cerabar S serves as a component of a system suitable for custody transfer measurement, for highly accurate measurement of pressures, and finds application in

custody transfer. It satisfies the applicable requirements in accordance with OIML R117-1 Edition 2007 (E) and EN 12405-1/A1 Edition 2006.

The Parts Certificate is issued on the basis of the following standards:

·    WELMEC guide 8.8 "General and Administrative Aspects of the Voluntary System of Modular Evaluation of Measuring instruments under the MID".

·    OIML R117-1 Edition 2007 (E) "Dynamic measuring systems for liquids other than water".

·    EN 12405-1/A1 Edition 2006 "Gas meters – Conversion devices – Part 1: volume conversion".

The Cerabar S pressure transmitter is used for the following measuring tasks:

·    Absolute pressure in gases or liquids in all areas of process engineering and process measurement technology

·    International usage thanks to a wide range of approvals

  

 

 

Download Datasheet:

Endress + Hauser Cerabar S PMP71

分享到:
Hits:  UpdateTime:1107  【Printing】  【Close